Knight Riderz Sequential LED Light Bar with Flashing Brake Alert
Dual intensity light bar with Red LEDs. In running light mode the LEDs sequence from side to side in a "Knight Rider" sequence. When the brake is applied the LED will flash for approximately 5-6 seconds then go to a solid on state until the brake is released. Both modes, running and brake, have been designed to create the maximum visibility. The unit comes pre-taped with 3M™ double sided tape for easy mounting to any flat surface. Simply connect the black wire to any ground wire, the Red wire to your existing brake light wire and the blue wire to an existing running light power source. No load equalizer or resistors required.
Optional 3M™ Adhesive Promoter must be shipped Best Method or UPS Ground. If alternate shipping method is selected, 3M™ Adhesive Promoter will be removed from package contents.
Dual Intensity, Red LEDs
Sequential Running Light with Flashing Brake Alert
Choice of Red or Smoke Lens
Dimensions: 0.7" W x 0.7" H
24 Gauge 45” Wire Lead
12 LED Knight Rider 4.7" L
21 LED Knight Rider 7.5" L
Lifetime LED Warranty
Works with any 12VDC system