- Plug n’ Play
- Lifetime Warranty
Smoked LED Ultra Tour-Pak® Light Kit for Harley-Davidson®
CUSTOMIZE YOUR TOUR-PAK LIGHTING
This kit has it ALL! Includes complete LED upgrade for all OEM Tour-Pak lighting and smoked lens conversion for 2006-2013 Harley-Davidson® Electra Glide Ultra Classic/Limited models, 2011-2013 Road Glide Ultra & 2008-2013 TriGlide models with King & Ultra Tour-Paks and Stock 1157 Incandescent Bulbs.
Kit Includes the following products:
- Motorcycle Tour-Pak LED Taillights convert rear facing Tour-Pak OEM corner run/brake lights to LED.
- Smoked Motorcycle Tour-Pak Lenses replace OEM rear facing Tour-Pak OEM corner lenses.
- ProBEAM® LED Tour Pak Arms are included to convert the OEM left and right lower tour-pak side arm lights to smoked lenses. Select from run/brake option or run/brake/turn* option at checkout.
ProBEAM® LED Tour Pak Arms have been engineered from the ground up using the highest quality automotive LEDs and modern design! With 26 super bright red LEDs per side. Smoked ProBEAM® LED Tour Pak Arms are available with plug and play run/brake function or run/brake/turn signal function.
*Note: ProBEAM® Run/Brake/Turn LED Tour Pak Arms convert rear OEM turn signals, Tour-Pak rear facing corner lights and left & right lower tour-pak side arm lights to function as run, brake and turn signal. This selection requires additional product (sold separately, see *RUN/BRAKE/TURN REQUIREMENTS below) to ensure correct function and compatability.
CA Residents WARNING: This product can expose you to chemicals including lead and lead components, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
96 GENESIS® LEDS PER BOARD
26 DUAL INTENSITY RED LEDS PER SIDE MARKER
PLUG AND PLAY INSTALLATION
LIFETIME LED WARRANTY
SOLD IN KIT
Plug and play on all 2006 to 2013 Harley-Davidson® Electra Glide® Ultra Classic/Limited Models, 2011-2013 Road Glide® Ultra & 2008-2013 Tri Glide® Models with King & Ultra Tour Paks® and Stock 1157 Incandescent Bulbs.
Does Not Fit 2010-2013 CVO™models or 2014 and newer models with OEM LED Tour Pak®
Before installing the run/brake/turn Smoked Tour Pak LED Conversion Kit, the motorcycle must be equipped with the following products to ensure correct function and compatability:
- SMART Signal Stabilizer™ is required to balance the turn signal load and the SMART Triple Play® Unit; to convert the OEM rear turn signals to function as run, brake & turn signals. Alternatively, the All-In-One Load Balancing SMART Triple Play® can be installed which will balance the turn signal load and provide run, brake & turn signal function within a single module.
- Rear fender OEM center taillight must be converted to a Run/Brake LED Motorcycle Taillight
- Rear OEM turn signal bulbs must be converted to Motorcycle LED Turn Signals
The run/brake tour-pak function selection does not require any additional products.