Stingerz® Complete Spyder Kit
CUSTOM CAN AM SPYDER LIGHT PACKAGE
Stingerz® are the most durable and flexible single color LED accent lights. Pre-taped on three sides allows the light to be mounted on the back surface or either side surface. Stingerz® provide a 120 degree viewing angle for an even light pattern and come with 48” color coded wire leads in high temp protective black sheathing. 100% sealed & waterproof LEDs are backed by a lifetime warranty against LED failure.
Custom Dynamics® Stingerz® Spyder Kit includes the following:
1 Stingerz® 99 LED strip (39.4" length) for mounting under front nose
2 Stingerz® 69 LED strips (25.4" length) for mounting inside front fenders
7 Stingerz® 30 LED strips (11.8" length) for mounting inside left and right side panels and for ground effects
3 Stingerz® 24 LED strips (9.4" length) for mounting inside left and right side panels
9 Stingerz® 12 LED strip (4.7" length) for mounting inside left and right side panels and in rear fender
2 Stingerz® 9 LED strips (3.5" length) for mounting inside left and right side panel
1 Complete Installation Kit which includes 3M Promoter, Push Button Switch, battery terminal connectors, mini ATC Fuse Holder with 3 amp fuse, Cage Clamp® connectors, butt connectors, heat shrink, extra 2 conductor cable and tie wraps.
Add one of Custom Dynamics® single color accent light remotes for added functions and to control your lights from up to 100ft away! Additional Installation Supplies also available.
This product contains recommended 3M Adhesive Promoter and must be shipped Best Method or UPS Ground. If alternate shipping method is selected, 3M Adhesive Promoter will be removed from package contents.
CA Residents WARNING: This product can expose you to chemicals including lead and lead components, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Specifications
Specifications204 LEDs per kit (1.0amp Current Draw)
1 cm LED Spacing
120 Degree Viewing Angle
3mm LEDs
Cuttable Every 3 LEDs, Minimum of 6
Dimensions: 5/16" Wide X 1/2" Deep
12VDC SYSTEMS
Lifetime LED Warranty
Sold Each
FITMENT
Recommended for 2008-2017 Can Am Spyder RS, RS-S, 2013-2016 ST, STS; compatible with 12VDC systems with a negative ground.
Compatible with: Black Magic™ 4 Remote, Magic™ Zone Remote or Simple On/Off remote.
Additional Stingerz® Kits and products also available.
SPYDER KIT CONTENTS
1 Stingerz® 99 LED strip for mounting under front nose
2 Stingerz® 69 LED strips for mounting inside front fenders
7 Stingerz® 30 LED strips for mounting inside left and right side panels and for ground effects
3 Stingerz® 24 LED strips for mounting inside left and right side panels
9 Stingerz® 12 LED strip for mounting inside left and right side panels and in rear fender
2 Stingerz® 9 LED strips for mounting inside left and right side panel
1 Complete Installation Kit which includes 3M Promoter, Push Button Switch, battery terminal connectors, mini ATC Fuse Holder with 3 amp fuse, Cage Clamp® connectors, butt connectors, heat shrink, extra 2 conductor cable and tie wraps.
