STCRUISER1

Stingerz® Cruiser Level 1 Kit

GREAT FOR ENGINE AND GROUND EFFECTS

Stingerz® are the most durable and flexible single color LED accent lights. Pre-taped on three sides allows the light to be mounted on the back surface or either side surface. Stingerz® provide a 120 degree viewing angle for an even light pattern and come with 48” color coded wire leads in high temp protective black sheathing. 100% sealed & waterproof LEDs are backed by a lifetime warranty against LED failure.

Custom Dynamics® Stingerz® Cruiser Level 1 Kit includes the following: 

Stingerz® 24 LED strips (9.4" length) for mounting under the gas tank

2 additional Stingerz® 24 LED strips (9.4" length) for mounting inside the rear fender or to the frame rails for ground effects

Stingerz® 12 LED strip (4.7" length) for mounting to the frame behind the seat

Stingerz® 9 LED strips (3.5" length) for mounting to the back of the air cleaner and front of the engine compartment

1 Complete Installation Kit which includes 3M PromoterPush Button Switchbattery terminal connectors, mini ATC Fuse Holder with 3 amp fuse, 5 position Cage Clamp® connectors, butt connectors, and tie wraps.

Add one of Custom Dynamics® single color accent light remotes for added functions and to control your lights from up to 100ft away! Additional Installation Supplies also available.

In stock
$129.95
Kit

This product contains recommended 3M Adhesive Promoter and must be shipped Best Method or UPS Ground. If alternate shipping method is selected, 3M Adhesive Promoter will be removed from package contents.

126 LEDs per kit (0.6amp Current Draw) 


1 cm LED Spacing


120 Degree Viewing Angle


3mm LEDs


Cuttable Every 3 LEDs, Minimum of 6


Dimensions: 5/16" Wide X 1/2" Deep


12VDC SYSTEMS


Lifetime LED Warranty


Sold Each

FITMENT

Recommended for Metric Cruiser motorcycles; compatible with 12VDC systems with a negative ground.

Compatible withBlack Magic™ 4 RemoteMagic™ Zone Remote or Simple On/Off remote

Additional Stingerz® Kits and products also available.

CRUISER 1 KIT CONTENTS

2 Stingerz® 24 LED strips for mounting under the gas tank

2 additional Stingerz® 24 LED strips for mounting inside the rear fender or to the frame rails for ground effects

Stingerz® 12 LED strip for mounting to the frame behind the seat

Stingerz® 9 LED strips for mounting to the back of the air cleaner and front of the engine compartmet

1 Complete Installation Kit which includes 3M PromoterPush Button Switchbattery terminal connectors, mini ATC Fuse Holder with 3 amp fuse, 5 position Cage Clamp® connectors, butt connectors, and tie wraps.

Write Your Own Review
You're reviewing:Stingerz® Cruiser Level 1 Kit
Your Rating
  • Recent Searches
  • triple play 119
  • Turn signals 217
  • Fender eliminator kit 150
  • MAGIC-STROBES-RSG 67