• Lifetime Warranty
STCRUISER1

Stingerz® Cruiser Level 1 Kit

GREAT FOR ENGINE AND GROUND EFFECTS

Stingerz® are the most durable and flexible single color LED accent lights. Pre-taped on three sides allows the light to be mounted on the back surface or either side surface. Stingerz® provide a 120 degree viewing angle for an even light pattern and come with 48” color coded wire leads in high temp protective black sheathing. 100% sealed & waterproof LEDs are backed by a lifetime warranty against LED failure.

Custom Dynamics® Stingerz® Cruiser Level 1 Kit includes the following: 

Stingerz® 24 LED strips (9.4" length) for mounting under the gas tank

2 additional Stingerz® 24 LED strips (9.4" length) for mounting inside the rear fender or to the frame rails for ground effects

Stingerz® 12 LED strip (4.7" length) for mounting to the frame behind the seat

Stingerz® 9 LED strips (3.5" length) for mounting to the back of the air cleaner and front of the engine compartment

1 Complete Installation Kit which includes Adhesive Primer, Push Button Switchbattery terminal connectors, mini ATC Fuse Holder with 3 amp fuse, 5 position Cage Clamp® connectors, butt connectors, and tie wraps.

Add one of Custom Dynamics® single color accent light remotes for added functions and to control your lights from up to 100ft away! Additional Installation Supplies also available.


In stock
Prices starting at $129.95
Kit
WARNING: Cancer & Reproductive Harm - www.p65warnings.ca.gov

126 LEDs per kit (0.6amp Current Draw) 


1 cm LED Spacing


120 Degree Viewing Angle


3mm LEDs


Cuttable Every 3 LEDs, Minimum of 6


Dimensions: 5/16" Wide X 1/2" Deep


12VDC SYSTEMS


Lifetime LED Warranty


Sold Each

FITMENT

Recommended for Metric Cruiser motorcycles; compatible with 12VDC systems with a negative ground.

Compatible withBlack Magic™ 4 RemoteMagic™ Zone Remote or Simple On/Off remote

Additional Stingerz® Kits and products also available.

CRUISER 1 KIT CONTENTS

2 Stingerz® 24 LED strips for mounting under the gas tank

2 additional Stingerz® 24 LED strips for mounting inside the rear fender or to the frame rails for ground effects

Stingerz® 12 LED strip for mounting to the frame behind the seat

Stingerz® 9 LED strips for mounting to the back of the air cleaner and front of the engine compartmet

1 Complete Installation Kit which includes Adhesive Primer, Push Button Switchbattery terminal connectors, mini ATC Fuse Holder with 3 amp fuse, 5 position Cage Clamp® connectors, butt connectors, and tie wraps.

Everything you need to know about motorcycle LED accent lights! LED choices, what to consider when purchasing, installation & helpful tips!

October 26, 2017
Write Your Own Review
You're reviewing:Stingerz® Cruiser Level 1 Kit
Your Rating