Stingerz® Cruiser Level 2 Kit
LIGHT UP YOUR GOLDWING
Stingerz® are the most durable and flexible single color LED accent lights. Pre-taped on three sides allows the light to be mounted on the back surface or either side surface. Stingerz® provide a 120 degree viewing angle for an even light pattern and come with 48” color coded wire leads in high temp protective black sheathing. 100% sealed & waterproof LEDs are backed by a lifetime warranty against LED failure.
Custom Dynamics® Stingerz® Cruiser Level 2 Kit includes the following:
2 Stingerz® 24 LED strips (9.4" length) for mounting under the trunk
6 Stingerz® 12 LED strip (4.7" length) for mounting inside the side vents & windshield
2 Stingerz® 9 LED strips (3.5" length) for mounting beneath the headlamp
2 Stingerz® 3 LED strips (1.2" length) for mounting in the side cover openings
1 Complete Installation Kit which includes Adhesive Primer, Push Button Switch, battery terminal connectors, mini ATC Fuse Holder with 3 amp fuse, 5 position Cage Clamp® connectors, butt connectors, and tie wraps.
Add one of Custom Dynamics® single color accent light remotes for added functions and to control your lights from up to 100ft away! Additional Installation Supplies also available.
Specifications
Specifications144 LEDs per kit (0.7amp Current Draw)
1 cm LED Spacing
120 Degree Viewing Angle
3mm LEDs
Cuttable Every 3 LEDs, Minimum of 6
Dimensions: 5/16" Wide X 1/2" Deep
12VDC SYSTEMS
Lifetime LED Warranty
Sold Each
FITMENT
Recommended for Honda Goldwing Models; compatible with 12VDC systems with a negative ground.
Compatible with: Black Magic™ 4 Remote, Magic™ Zone Remote or Simple On/Off remote.
Additional Stingerz® Kits and products also available.
CRUISER 2 KIT CONTENTS
2 Stingerz® 24 LED strips for mounting under the trunk
6 Stingerz® 12 LED strips for mounting inside the side vents & windshield
2 Stingerz® 9 LED strips for mounting beneath the headlamp
2 Stingerz® 3 LED strips for mounting in the side cover openings
1 Complete Installation Kit which includes Adhesive Primer, Push Button Switch, battery terminal connectors, mini ATC Fuse Holder with 3 amp fuse, 5 position Cage Clamp® connectors, butt connectors, and tie wraps.