Stingerz® Scooter Kit
LIGHT UP YOUR SCOOTER
Stingerz® are the most durable and flexible single color LED accent lights. Pre-taped on three sides allows the light to be mounted on the back surface or either side surface. Stingerz® provide a 120 degree viewing angle for an even light pattern and come with 48” color coded wire leads in high temp protective black sheathing. 100% sealed & waterproof LEDs are backed by a lifetime warranty against LED failure.
Custom Dynamics® Stingerz® Scooter Kit includes the following:
6 Stingerz® 9 LED strips (3.5" length) for mounting in larger vent openings
4 Stingerz® 3 LED strips (1.2" length) for mounting in small openings in vents
1 Complete Installation Kit which includes adhesive primer, Push Button Switch, battery terminal connectors, mini ATC Fuse Holder with 3 amp fuse, 5 position Cage Clamp® connectors, butt connectors, and tie wraps.
Add one of Custom Dynamics® single color accent light remotes for added functions and to control your lights from up to 100ft away! Additional Installation Supplies also available.
This product contains recommended 3M Adhesive Promoter and must be shipped Best Method or UPS Ground. If alternate shipping method is selected, 3M Adhesive Promoter will be removed from package contents.
CA Residents WARNING: This product can expose you to chemicals including lead and lead components, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Specifications
Specifications66 LEDs per kit (0.3amp Current Draw)
1 cm LED Spacing
120 Degree Viewing Angle
3mm LEDs
Cuttable Every 3 LEDs, Minimum of 6
Dimensions: 5/16" Wide X 1/2" Deep
12VDC SYSTEMS
Lifetime LED Warranty
Sold Each
FITMENT
Recommended for all 12VDC Scooters; compatible with 12VDC systems with a negative ground.
Compatible with: Black Magic™ 4 Remote, Magic™ Zone Remote or Simple On/Off remote.
Additional Stingerz® Kits and products also available.
SCOOTER KIT CONTENTS
6 Stingerz® 9 LED strips for mounting in larger vent openings
4 Stingerz® 3 LED strips for mounting in small openings in vents
1 Complete Installation Kit which includes adhesive primer, Push Button Switch, battery terminal connectors, mini ATC Fuse Holder with 3 amp fuse, Cage Clamp® connectors, butt connectors, and tie wraps.
