Stingerz® Trike Level 1 Kit
BEST FOR METRIC CRUISER TRIKES
Stingerz® are the most durable and flexible single color LED accent lights. Pre-taped on three sides allows the light to be mounted on the back surface or either side surface. Stingerz® provide a 120 degree viewing angle for an even light pattern and come with 48” color coded wire leads in high temp protective black sheathing. 100% sealed & waterproof LEDs are backed by a lifetime warranty against LED failure.
Custom Dynamics® Stingerz® Trike 1 Kit includes the following:
2 Stingerz® 24 LED strips (9.4" length) for mounting under the gas tank
2 additional Stingerz® 24 LED strips (9.4" length) for mounting to the frame rails for ground effects
1 Stingerz® 12 LED strip (4.7" length) for mounting to the frame behind the seat
2 Stingerz® 9 LED strips (3.5" length) for mounting to the back of the air cleaner and front of the engine compartment
3 Stingerz® 99 LED strip (39.4" length) for mounting inside rear wheel wells and under rear fender for ground effects
1 Complete Installation Kit which includes adhesive primer, Push Button Switch, battery terminal connectors, mini ATC Fuse Holder with 3 amp fuse, 5 position Cage Clamp® connectors, butt connectors, and tie wraps.
Add one of Custom Dynamics® single color accent light remotes for added functions and to control your lights from up to 100ft away! Additional Installation Supplies also available.
Specifications
Specifications432 LEDs per Kit (Less than 2.0amp Current Draw)
1 cm LED Spacing
120 Degree Viewing Angle
3mm LEDs
Cuttable Every 3 LEDs, Minimum of 6
Dimensions: 5/16" Wide X 1/2" Deep
12VDC SYSTEMS
Lifetime LED Warranty
Sold Each
FITMENT
Recommended for Metric Cruiser Trike motorcycles; compatible with 12VDC systems with a negative ground.
Compatible with: Black Magic™ 4 Remote, Magic™ Zone Remote or Simple On/Off remote.
Additional Stingerz® Kits and products also available.
TRIKE 1 KIT CONTENTS
2 Stingerz® 24 LED strips for mounting under the gas tank
2 additional Stingerz® 24 LED strips for mounting to the frame rails for ground effects
1 Stingerz® 12 LED strip for mounting to the frame behind the seat
2 Stingerz® 9 LED strips for mounting to the back of the air cleaner and front of the engine compartment
3 Stingerz® 99 LED strip for mounting inside rear wheel wells and under rear fender for ground effects
1 Complete Installation Kit which includes adhesive primer, Push Button Switch, battery terminal connectors, mini ATC Fuse Holder with 3 amp fuse, 5 position Cage Clamp® connectors, butt connectors, and tie wraps.