STINGERZ15

Stingerz® Wheel Lights

EASILY MOUNTS TO BRAKE CALIPER

Stingerz® Wheel Lights contain 15 LEDs which illuminate 360 degrees around the outer edge of a round puck to project light on the wheel rim. Mounts to the inside of the front wheel brake caliper where there is a 5/8” clearance between the wheel and caliper. Each Stingerz® Wheel Light comes with 84” color coded wire leads in high temp protective black sheathing, have a waterproof conformal coating, and are pre-taped with 3M™ adhesive tape for a durable installation. All LEDs are backed by a lifetime warranty against LED failure. Sold Each.

Custom Dynamics® Red, Blue, Green, White, Orange, Purple, Pink, and Yellow Stingerz® are available with either a chrome or black case to match the caliper.

Dimensions: 2.6” x 2.1” x .5”. 

Add one of Custom Dynamics® single color accent light remotes for added functions and to control your lights from up to 100ft away. 

Add a 3M™ Primer Ampule to increase adhesion of 3M™ double-sided tapeFor Chrome Brake Lines, add Stainless Steel Wire Loom and Chrome Zip Ties for a clean wiring job! 

In stock
$26.95
Each

Optional 3M™ Adhesive Promoter must be shipped Best Method or UPS Ground. If alternate shipping method is selected, 3M™ Adhesive Promoter will be removed from package contents.

Prop 65 SymbolCA Residents WARNING: This product can expose you to chemicals including lead and lead components, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

1 cm LED Spacing


120 Degree Viewing Angle


3mm LEDs  


Dimensions: 2.6" X 2.1" X 0.5"


84” COLOR CODED WIRE LEADS IN HIGH TEMP PROTECTIVE BLACK SHEATHING


12VDC SYSTEMS


Lifetime LED Warranty


Sold Each

FITMENT

All Harley-Davidson® Brake Calipers (except: narrow glide front ends (Sportsters®, some Dynas®), and '06 and up V-Rods).

Also Fits Any Metric where the back side of the brake caliper is flat and there is 5/8" clearance between the caliper and wheel.  

Compatible with 12VDC systems with a negative ground.

RELATED PRODUCTS

Additional Stingerz® Kits and products also available.

Add a 3M™ Primer Ampule to increase adhesion of 3M™ double-sided tape

For Chrome Brake Lines, add Stainless Steel Wire Loom and Chrome Zip Ties for a clean wiring job! 

Compatible withBlack Magic™ 4 RemoteMagic™ Zone Remote or Simple On/Off remote

Write Your Own Review
You're reviewing:Stingerz® Wheel Lights
Your Rating