Tribar Eliminator for US Models Harley-Davidson® 2010-2013 Street Glide & Road Glide

TriBar Eliminator Harness offers a plug and play solution to remove the stock TriBar (OEM Part Number 69375-10) and rear fender fascia on 2010-2013 US Model Harley-Davidson® Street Glide (FLHX) and Road Glide Custom (FLTRX). Eight inches of pass through wiring, equipped with female connectors to mate with motorcycle's main wiring harness and OEM turn signal wire harness. Passes through brake light, turn signal function and license plate illumination power. 

Removal of OEM TriBar light requires additional run, brake, turn module or Custom Dynamics® SMART Triple Play® (sold separately). Signal Stabilizer™ may also be required if not already installed (sold separately). In addition, this configuration is not compatible with "red ring" style rear turn signals; only use with solid red rear turn signal configurations like our Genesis® 4 Solid Red 1157 Rear Turn Signals (sold separately). 

Custom Dynamics® TriBar Eliminator Harness also available for International and Canadian models.

2010-2013 US Model Harley-Davidson® Street Glide (FLHX) and Road Glide Custom (FLTRX).

Does NOT Fit International (HDI) or Canadian (CNA) Models. 

A Run/Brake/Turn module like our SMART Triple Play® is required to retain run, brake and turn signal functions on the stock rear turn signals when the factory OEM TriBar light has been removed for a custom fender application. 

Note: This configuration is not compatible with "red ring" style rear turn signals; only use with solid red rear turn signal configurations like our Genesis® 4 Solid Red 1157 Rear Turn Signals (sold separately). 

• 8" PASS THROUGH WIRE LENGTH
• FEMALE CONNECTORS
• REPLACES OEM PART NUMBER 69375-10
• PASSES BRAKE LIGHT, TURN SIGNAL & PLATE ILLUMINATION
• PLUG AND PLAY INSTALLATION