PROFESSIONAL GRADE FLEXIBLE LED LIGHTING STRIPS
TruFLEX II® is a flexible LED lighting strip unlike any other on the market today! Every aspect of the TruFLEX II® has been engineered from the ground up for maximum performance and reliability. TruFLEX II® can be used for running lights, turn signals, tail lights, or brake lights on any 12VDC system including motorcycles, automobiles, trucks, boats, ATVs, and snowmobiles. Our unique tube design with flat side-surfaces allow TruFLEXII ® to be mounted on either side surface with our optional side mount kit (sold separately) or can mount standard on the bottom surface. TruFLEX II® is a 2 wire, single intensity system available in 40 (0.34” X 0.30” X 5.875”) or 65 (0.34” X 0.30” X 8.75”) LEDs. Choice of Red LEDs with either Red or Smoke Tubing or Amber LEDs with a choice of Amber or Smoked Tubing. Lifetime warranty against LED failure, water damage, and UV damage. Sold Each.
Use with a dual converter to convert from single function wire to a high/low wire. Low intensity (running) illuminates at 30% Intensity while high intensity (brake or turn) illuminates at 100% Intensity.
Use with an Eclipze2® module to convert Amber TruFLEX II® to Front 100% Running Light with Full Contrast Turn Signal Flash or use with Red TruFLEX II® for Rear Brake Lights with Full Contrast Turn Signals.
3M™ Adhesive Promoter is recommended for a secure application.
Optional 3M™ Adhesive Promoter must be shipped Best Method or UPS Ground. If alternate shipping method is selected, 3M™ Adhesive Promoter will be removed from package contents.
CA Residents WARNING: This product can expose you to chemicals including lead and lead components, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
40 LED TruFLEX® II
65 LED TruFLEX® II
Output: 4000-5000 mcd
2 Wire Design
Dimensions: 0.34" W X 0.30" H
Lifetime LED Warranty
12VDC systems with a negative ground.
Additional TruFLEX® OptionsDual Color TruFLEX®
TruFLEXII® Dual Converters install in line with the single power wire from the TruFLEX II® LED light strips to convert it from single intensity (i.e. Brake Only) to dual intensity (i.e. Run/Brake or Run/Turn). Low intensity (running) illuminates at 30% Intensity while high intensity (brake or turn) illuminates at 100% Intensity.
Eclipze2® Module is recommend to convert Amber TruFLEX II® to Front 100% Running Light with Full Contrast Turn Signal Flash or with Red TruFLEX II® for Rear Brake Light with Full Contrast Turn Signal Flash (automatically giving the priority of Turn over Brake).