Turn Signal Eliminator Kit for H-D™ Touring Motorcycles

OUT OF STOCK: CHROME STANDARD CONFIG. EXPECTED JULY

Whether you’re looking to freshen up your touring motorcycle’s look or simply streamline its profile, this Turn Signal Eliminator Kit is a stylish upgrade. The aluminum mounting plate replaces the stock bulky rear turn signal bar with a compact, low profile license plate solution that blends smoothly into your bike's design. Available in Gloss Black, Chrome, or Raw (ready for paint) finish with mounting hardware included.

Included mounting plate is a direct bolt on replacement for the OEM stock turn signal bar on 1997-2013 Harley-Davidson® Electra Glide/Ultra (FLHT) models including CVO™ & Road Glide Ultra (FLTRU), 1997-2022 Road King® (FLHR), Road King Classic (FLHRC), 2017-2025 Road King Special (FLHRXS), 2019-2022 Electra Glide Standard (FLHT), 2014-2015 CVO™ Limited (FLHTKSE), 1999-2023 Road Glide (FLTR), Road Glide Custom (FLTRX), Road Glide Special (FLTRXS), Road Glide ST (FLTRXST), 2015 CVO™ Road Glide Ultra (FLTRUSE), 2006-2023 Street Glide (FLHX), Street Glide Special (FLHXS) and Street Glide ST (FLHXST). 

This kit also includes your choice of radius license plate frame with 6 bright white LEDs for tag illumination only (2-wire hookup) or the tri-radius LED license plate frame with an additional 20 dual intensity red LEDs flush mounted on each side (5-wire hookup). Model specific wire adapters (fitment listed below, sold separately) are available with pre-installed Posi-Tap connectors for tapping in required wire connections.

• BCM Posi-Tap Wiring Adapter fits 2014-2023 Harley-Davidson® Street Glide (FLHX), Street Glide Special (FLHXS), 2015-2023 Road Glide (FLTRX), Road Glide Special (FLTRXS), 2017-2025 Road King Special (FLHRXS), 2014-2022 Road King (FLHR), 2022-2023 Street Glide ST (FLHXST), Road Glide ST (FLTRXST), 2019-2022 Electra Glide Standard (FLHT), 2014-2015 CVO™ Limited (FLHTKSE) and 2015 CVO™ Road Glide Ultra (FLTRUSE). Alternatively, shop our Tri-Radius Turn Signal Eliminator Kit for a complete plug and play solution on these models. 
• HD Posi-Tap Wiring Adapter fits 1997-2013 Harley-Davidson® Electra Glide, Ultra Classic, Ultra Limited models (including CVO™), Road King (FLHR), Road King Classic (FLHRC), Road Glide Ultra (FLTRU)/Road Glide Ultra CVO™ (FLTRUSE), 1998-2009 Road Glide Standard (FLTR) and 2006-2009 Street Glide (FLHX).
• SS6 Posi-Tap Wiring Adapter fits 2010-2013 Harley-Davidson® Street Glide (FLHX) and Road Glide Custom (FLTRX). Does not fit CVO™ models.

Signal Stabilizer™ (sold separately) may be required when rear turn signals are removed on Harley-Davidson® Touring models to ensure proper turn signal function and flash speed.

Direct bolt on replacement for the OEM stock turn signal bar on 1997-2013 Harley-Davidson® Electra Glide/Ultra (FLHT) models including CVO™ & Road Glide Ultra (FLTRU), 1997-2022 Road King® (FLHR), Road King Classic (FLHRC), 2017-2025 Road King Special (FLHRXS), 2019-2022 Electra Glide Standard (FLHT), 2014-2015 CVO™ Limited (FLHTKSE), 1999-2023 Road Glide (FLTR), Road Glide Custom (FLTRX), Road Glide Special (FLTRXS), Road Glide ST (FLTRXST), 2015 CVO™ Road Glide Ultra (FLTRUSE), 2006-2023 Street Glide (FLHX), Street Glide Special (FLHXS) and Street Glide ST (FLHXST).

Note: Fits early model narrow style and current model wide style rear fenders. Mount will overlap fender edge on narrow style rear fenders when installed.  

Does Not Fit 2010-2022 Street Glide CVO™ (FLHXSE), 2009-2022 Road Glide CVO™ (FLTRXSE), 2013-2014 Road King CVO™ (FLHRSE) or 2014-2024 H-D™ Touring models with rear turn signals built into the Tour-Pak.

Signal Stabilizer™  (sold separately) may be required when rear turn signals are removed on Harley-Davidson® Touring models to ensure proper turn signal function and flash speed.

Caution: Check local and state laws before removing OEM turn signals. If your state requires turn signals, add DOT compliant units to your vehicle. 

• REPLACES OEM REAR TURN SIGNAL BAR
• 6 WHITE LEDS FOR PLATE ILLUMINATION
• TRI-RADIUS UPGRADE INCLUDES 20 RED LEDS PER SIDE
• GLOSS BLACK, CHROME, OR RAW (READY FOR PAINT) FINISH
• UTILIZES STOCK BOLT HOLES FOR MOUNTING
• MOUNTING HARDWARE INCLUDED
• 43" WIRE LEADS
• TWO WIRE RUNNING LIGHT HOOK UP
• PLATE FRAME DIMENSIONS: 7-3/16" L X 4-1/4" W
• DEGREE OF CURVE: 12 DEGREE
• LIFETIME LED WARRANTY
• SOLD KIT
• REPLACEMENT FOR OEM PART 68742-09, 73314-10