• Plug n’ Play
  • Lifetime Warranty
CD-TS-ELIM-06BCM

Turn Signal Eliminator Kit with Tri Radius Illuminated Plate Frame for H-D™

SIMPLE SOLUTION TO REMOVE OEM REAR TURN SIGNAL BAR

Light-weight aluminum radius license plate mount adds a custom look to the rear fender by eliminating the stock rear turn signal bar. LED illuminated radius plate frame in gloss black or chrome finish includes mounting hardware. 100% plug and play installation provides tag illumination while 20 dual intensity red LEDs are flush mounted on each side providing rear facing Running lights with Turn Signal or Brake/Turn depending on model. Lifetime LED Warranty.

Direct bolt on, plug and play replacement for the OEM stock turn signal bar on 2014-2020 Road King® (FLHR) & Road King® Special (FLHRS). 2019-2020 Electra Glide Standard (FLHT), 2014-2015 FLHTKSE & 2015 FLTRUSE. 2014-2020 Street Glide® (FLHX), Street Glide® Special (FLHXS) and 2015-2020 Road Glide® (FLTRX) & Road Glide® Special (FLTRXS).

Functions as Run/Brake/Turn on 2014-2020 Street Glide, Street Glide Special, Road Glide, Road Glide Special, and Road King Special.

Functions as Run/Turn on 2014-2018 Electra Glide Police (FLHTP), 2014-2020 Road King Standard, 2014-2015 CVO™ Limited, and 2015 CVO™ Road Glide Ultra. 2019-2020 Electra Glide Standard (FLHT). 

Does Not Fit 2014-2020 Street Glide® CVO™ (FLHXSE), 2009-2020 Road Glide® CVO™ (FLTRXSE), 2013-2014 Road King® CVO™ (FLHRSE) or 2014-2020 H-D™ Touring models with rear turn signals built into the Tour-Pak®.

Caution: Check local and state laws before removing OEM turn signals. If your state requires turn signals, add DOT compliant units to your vehicle.

Add the MPR Extension Harness to install up to 3 separate Custom Dynamics® plug & play lighting products to run off a single MPR Adapter Harness.

Replacement for OEM Part 68742-09, 73314-10


In stock
$179.95
Each

Prop 65 WarningCA Residents WARNING: This product can expose you to chemicals including lead and lead components, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Replaces OEM Rear Turn Signal Bar


6 White LEDs for plate Illumination


20 Red LEDs Per Side


Gloss Black or Chrome Finish


Utilizes stock bolt holes for mounting


Mounting Hardware Included


100% Plug and Play Installation


43" Wire Leads


Plate Frame Dimensions: 7-3/16" L x 4-1/4" W


Degree of curve: 12 degree


Lifetime LED Warranty


Sold Kit


Replacement for OEM Part 68742-09, 73314-10

FITMENT

Direct bolt on, plug and play replacement for the OEM stock turn signal bar on 2014-2020 Road King® (FLHR) & Road King® Special (FLHRS). 2019-2020 Electra Glide Standard (FLHT), 2014-2015 FLHTKSE & 2015 FLTRUSE. 2014-2020 Street Glide® (FLHX), Street Glide® Special (FLHXS) and 2015-2020 Road Glide® (FLTRX) & Road Glide® Special (FLTRXS).

 

Does Not Fit 2014-2020 Street Glide® CVO™ (FLHXSE), 2009-2020 Road Glide® CVO™ (FLTRXSE), 2013-2014 Road King® CVO™ (FLHRSE) or 2014-2020 H-D™ Touring models with rear turn signals built into the Tour-Pak®.

Caution: Check local and state laws before removing OEM turn signals. If your state requires turn signals, add DOT compliant units to your vehicle. 

FUNCTION

Functions as Run/Brake/Turn on 2014-2020 Street Glide, Street Glide Special, Road Glide, Road Glide Special, and Road King Special.


Functions as Run/Turn on 2014-2018 Electra Glide Police (FLHTP), 2014-2020 Road King Standard, 2014-2015 CVO™ Limited, and 2015 CVO™ Road Glide Ultra. 2019-2020 Electra Glide Standard (FLHT). 

Customer Gallery

Custom Dynamics® Turn Signal Eliminator Kit for Harley Davidson Touring motorcycles. Remove the stock rear turn signal arm bar with ease!

April 15, 2019

Custom Dynamics LED Lighting for Performance Baggers: LED Turn Signal, LED Brake Lighting, Harley Davidson LED Taillights

August 31, 2020
Write Your Own Review
You're reviewing:Turn Signal Eliminator Kit with Tri Radius Illuminated Plate Frame for H-D™
Your Rating