Universal 7.5 Ohm Metric Turn Signal Load Equalizer
HEAT TYPE LOAD EQUALIZER
Universal 7.5 Ohm Turn Signal Load Equalizer for Metric models hardwires to the stock turn signal wires to to slow the turn signal flash rate to normal after installing LED Turn Signals.
One load equalizer is typically needed for each pair of turn signals that are replaced. The load equalizer produces an equivalent load of a 7.5 ohms (1.9 amps @ 14VDC), therefore the unit will get hot and should not be used with four way hazards.
Caution: This load equalizer will get hot, please mount accordingly. Suggested Mounting - Under seat securely mounted to frame rail.
Posi-Tap® connectors included for quick installation.
Recommended for use on Metric models.
Models with CanBus electrical systems do NOT require a Load Equalizer.
CA Residents WARNING: This product can expose you to chemicals including lead and lead components, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Specifications
SpecificationsHeat Type Load Equalizer
Produces equivalent load of 7.5 ohms
(1.9 amps @ 14VDC)
One load equalizer needed for each pair of turn signals
Sold Each
FITMENT
Recommended for use on Metric models.
Models with CanBus electrical systems do NOT require a Load Equalizer.
RELATED PRODUCTS
Use in conjunction with Custom Dynamics® plug and play LED Turn Signals
Install our recommended Custom Dynamics® SMART Signal Stabilizer™ for a no load/no heat plug and play option with 5 year warranty
Alternatively replace any stock 2 or 3 pin turn signal flasher with a non-load dependent Flasher Relay
