Universal Magic Strobes™ Brake Light Flasher
BE SAFE AND BE SEEN™
Universal module with 10 user selectable flash/strobe patterns for brake light. Works with LEDs or incandescent bulbs. Just cut the brake line wire and install the Magic Brake Light Flasher with the enclosed Posi-Lock® and Posi-Tap™connectors.
Fits all 3 wire (ground, high, low) 12VDC taillight systems
Although this device has been designed to significantly increase your braking visibility, flash/strobe patterns may not be street legal.
10 Flash/Strobe Patterns
3 WIRE POSI-TAP and Posi-Lock INSTALLATION
22 awg wire leads
Over Current Protection
Short Circuit Protection
Reverse Wiring Protection
84 Watts Max Power Rating, 12VDC
Compact Size: 2.25" X 1.25” X 0.5"
Compatible with all 3 wire (ground, high, low) 12VDC taillight systems. Does not work with CanBus electrical systems.
Additional Fitments also available.
Pattern 0: Four Flashes then Solid (Incandescent or LED)
Pattern 1: Four Flashes, Solid for 3 Seconds, Repeat (Incandescent or LED)
Pattern 2: Seven Flashes then Solid (Incandescent or LED)
Pattern 3: Seven Flashes, Solid for 3 Seconds, Repeat (Incandescent or LED)
Pattern 4: Quad Strobe, then Solid for 1 Second then Quad Strobe (LED Only)
Pattern 5: Quad Strobe, Solid for 1 Second, then Quad Strobe, Solid for 3 Seconds, Repeat (LED Only)
Pattern 6: Blaster X Pattern for 6 Seconds, then Solid (LED Only)
Pattern 7: Custom LED Blaster X Cycle, Repeat (LED Only)
Pattern 8: Max Strobe 4 Seconds, Solid (LED Only)
Pattern 9: No Pattern